# \#homing

**URL:** https://forum.avidcnc.com/tag/homing/51.md

[Latest](https://forum.avidcnc.com/latest.md) · [Categories](https://forum.avidcnc.com/categories.md) · [Tags](https://forum.avidcnc.com/tags.md)

---

## [Y axes won't back off homing sensor](https://forum.avidcnc.com/t/y-axes-wont-back-off-homing-sensor/5529)

<div class="topic-metadata">

**Author:** [@LivewireCNC](https://forum.avidcnc.com/u/LivewireCNC)\
**Replies:** 1\
**Last updated:** [December 2, 2025, 12:16am UTC](https://forum.avidcnc.com/t/y-axes-wont-back-off-homing-sensor/5529 "2025-12-02T00:16:50Z")

</div>

Hey everyone, I’m new here and I’m new-ish to the system I’m using now. I saw a couple of posts that seem similar to the problem I’m having but the fixes there don’t seem to apply here because there are different factor…

---

## [Homing on Y axis not completing](https://forum.avidcnc.com/t/homing-on-y-axis-not-completing/2191)

<div class="topic-metadata">

**Author:** [@Drew](https://forum.avidcnc.com/u/Drew)\
**Replies:** 3\
**Last updated:** [June 29, 2023, 6:29pm UTC](https://forum.avidcnc.com/t/homing-on-y-axis-not-completing/2191 "2023-06-29T18:29:20Z")

</div>

Trying to get our touchplate set up but we need the homing to work first. Z homes fine and then so does x where it will move until it sees the sensor and then backs of back to 0. Y does the same thing as the other axis’…