FOR SALE: Avid PRO4896 Dual-System CNC Package – Router + Plasma + Rotary (Charlottesville, VA)
Price: $26,000
Location: Charlottesville, Virginia
Pickup Only – please allow 3–5 business days for pickup so I can prepare the equipment.
System Overview
Complete Avid PRO4896 4′ × 8′ CNC Router package with dual control systems for both router and plasma operation.
Purchased new in 2022, professionally assembled, powered on once for calibration, and never used for cutting.
All items have been kept indoors and remain in excellent working order.
Includes the full Avid configuration listed below, plus a large industrial air compressor and shop-vac system.
Components Included
-
PRO4896 4′ × 8′ CNC Router Kit
-
NEMA 34 ½″ Shaft Compatible
-
8″ Z-Axis Travel / 8″ Gantry Height
-
Extended Gantry Width
-
-
Leg Kit (PRO CNC, 4′ × 8′)
-
PRO Ballscrew Z-Axis (8″ Travel, ½″ Coupler)
-
PRO Z-Axis Cable Track Kit
-
Plug & Play Plasma NEMA 34 CNC Control System
-
(1) 20′ + (3) 28′ cables
-
5th-Drive Upgrade included
-
-
Pepperl + Fuchs Proximity Sensor Kit (PRO CNC configuration)
-
8.7 HP Plug & Play Spindle / VFD System (CRP800 Standard)
-
8.7 HP Spindle Tramming Mount
-
Plasma Torch Mount Kit for Hypertherm Machine Torch
-
4′ × 4′ PRO CNC Plasma Water Table
-
Auto Z and Corner-Finding Touch Plate
-
960 oz-in NEMA 34 Motor + High-Current 28′ Cable
-
Additional Pepperl + Fuchs Sensor + M12 Cable & Splitter
-
**Mach4 CNC Control Software (**electronic transfer)
-
**SheetCam Plasma CAM Software (**electronic transfer)
-
**VCarve Pro CAM Software (**electronic transfer)
-
ER32 Collet and Nut Set (Imperial)
-
CNC Router Bit Set & Aluminum Cutting End Mill Set
-
Vertical Workholding Spoilboard Fasteners
-
Avid CNC Rotary Axis – NEMA 34 Plug-&-Play, Recessed Mounting Kit, 49″ Frame Length
-
Hypertherm 45XP with Ohmic Retaining Cap – brand new, never fired
Additional Equipment
-
Industrial Air Compressor (~$1,300 value) – complete, motor and belt included, ready to assemble
-
Large Shop Vac System – 230 V unit, cosmetic scuffs only, fully functional
Electrical Requirements
-
Air Compressor – 230 V
-
Shop Vac System – 230 V
-
Plasma Torch – 230 V (110 V adapter included but not recommended)
-
CNC Router – Standard 120 V control and motor system|
Buyer should ensure adequate 230 V power availability for installation.
Condition
-
Powered on once for motion calibration only; spindle and plasma have never been run.
-
Minor surface marks from assembly and transport.
-
Stepper motor assemblies and mounts are pre-assembled.
-
Buyer will need to order the screw kit for final table assembly.
-
All items stored indoors, clean, and ready for setup.
Terms & Payment
-
Price: $26,000
-
Payment Methods:
-
Cash accepted in person at my bank for verification and deposit, or
-
Bank wire transfer completed and cleared prior to pickup.
-
-
No checks, cashier’s checks, or credit card payments.
-
Equipment is located in a secure storage facility without electrical service.
-
Buyer is welcome to visually inspect all components before payment.
-
Buyers are also welcome to bring a generator or portable power source if they wish to test or verify operation prior to purchase.
-
-
Sale is final and as-is.
-
All components were purchased new in 2022, assembled once, and never used for cutting or production.
-
Serial numbers for major components (spindle, plasma, motors, rotary, compressor, etc.) will be documented in the Bill of Sale for both parties’ records.
-
-
Once payment is verified, the sale will be finalized and the equipment becomes the property of the buyer. Everything has been stored carefully and is ready for its new home.
About the Sale
I originally bought this system in 2022 with plans to launch a small fabrication and design shop. Life had other plans — a big move, a career shift back into IT, and a storage unit that’s been home to more potential than production.
The equipment has been assembled, powered on once for calibration, and then carefully stored indoors ever since. It’s a beautiful setup that deserves to be in a shop where it will actually get to make something.
If you have any questions, I’m happy to walk through what I can. I’m not a CNC expert — I never got far enough to become one — but I know exactly what’s included and that it’s in great shape. Whoever picks this up will be getting a complete, never-used system ready to bring to life.
Note on Photos:
The images shown are of my actual equipment during the original setup phase, with the exception of the dust collection system image (that one is a stock photo of the same model for reference).
The system was fully assembled and powered on briefly in 2022 before being carefully disassembled for storage. The plasma control system, water table, and additional components are not pictured here simply because I didn’t have photos of them before disassembly — everything listed in the configuration below is included in the sale.
Reassembling the full setup just for photos would require significant time and space, so I’m keeping the listing focused on accurate information rather than staged presentation.
